The grinder should have a special person responsible for maintenance and use, regular maintenance, to ensure that the machine tool is in good condition.

1. After the operation, all parts of the machine are sliding parts, which should be cleaned and oiled.

2. Remove grinding debris from all parts of the grinder.

3. Location, anti-rust.

Cautions for Maintenance of Above Grinding Machine

1. Before grinding, please correct the balance of grinding wheel.

2. Select grinding wheels carefully according to material quality and hardness.

3. The spindle end and grinding wheel flange should be coated with thin oil film to prevent rust.

4. Please note the rotation direction of the spindle.

5. It is forbidden to use air guns to clean work objects and machines.

6. Please pay attention to whether the oil line of the oil window is smooth.

7. Vacuum cleaner, filter steel, please clean once a week.

8. When suction is weak, please check if dust is blocked in the suction pipe.

9. Keep the vacuum pipe clean, otherwise it will cause combustion.

Maintenance of Grinder Sucker

The disk surface of the magnetic casting or electromagnetic sucker is the basis for determining the grinding accuracy of the workpiece. It should be properly maintained and maintained. If the accuracy of the workpiece is poor or the surface of the workpiece is damaged, the surface of the workpiece can be grinded again, and the accuracy of the surface of the workpiece can meet the requirements, so that the accuracy of the workpiece can be ensured.

Maintenance of Grinding Machine Lubrication System

Lubricating oil is replaced in the first month of use, and every 3-6 months thereafter. There is a leak plug under the tank, which can be used. And please note that when changing oil, the tank and the filter are cleaned together.